Main

Contacts

Links

Info

Pics1

Pics2

Pics3

Pics4

H20 cooled computer

Why would anyone put water in there computer, the answer a nice and cool computer.

yes, that is frost on the block

Step One

 Buy the equipment, pump, radiator, water block, hoses, and fittings.

Step Two

Cut out any openings for the water system.

I used a Dremel to cut out the opening for the radiator. Didn't take long to cut out.

Step Three

Add in the water cooling parts only.

make sure there are no leaks in the system, air or water.

Step Four

Start adding in our caponets in our computer stuff back in, and CAREFULLY ATTACK THE WATER BOCK!!!! If you aren't careful you will chip your CPU. luckily I haven't chipped my CPU but I have friends that have done so (Doug and James).

 Add artic silver or any thermal compound

attach the water block to the motherboard and tighten the bolts diagonally to prevent chipping of the CPU.

Step five

Start her up and over clock here it like crazy.

More Pics after I got my new case

Here it is with the panels on

Here is the side view with the panel off... can see the block

Here is the front view of the case... you can see the reservoir here